Applications

• Rural and urban potable water supply scheme
• Pumpset irrigation
• Domestic plumbing
• Effluent discharge lines
• Drainage and sewage
• Telephone cable ducting
• Electrical conduits

• Counter rotating parallel screws for better performance and hydrostatic thrust bearings for infinite life
• Compact and reliable gear box
• Special screw design with internal oil cooling system to maintain screw temperature
• Extruder screw speed is synchronised with traction and cutting unit
• Shorter front barrel, can be rotated in 4 positions to get longer working life
• Lower capital cost/kg output than any other make machines

• Computer aided design for smooth flow of plastic melt
• Resistant to high melt pressure
• High die volume
• High output at smaller pipe sizes also
• Melt temperature indication
• Die trolley standard for dies above 160 mm

CALIBRATION

AND

COOLING

UNITS

Vaccum Sizing Units

• Axail adjustment of tank on slide rails with locking arrangement
• Transverse movement and height adjustment of tank
• Self cleaning type spray nozzles with wide opening
• Water level control & temperature control
• Accurate vaccum control

Special features for VST- 250/W and VST- 400/W

• Two vaccum chambers for quick startup and less wastage
• More accurate vaccum control in first chamber for obtaining better pipe diameter control
• Motorised axial movement

TRACTION

UNITS

• Twin or multitrack system
• Track adjustable to accommodate different sizes of pipes
• Different range of line speeds can be achieved by changing sprockets
• Manual/pneumatic track movement
• Tracks with proper tensioning arrangement for chain
• Easy accessibility of all components for maintainence

PIPE

CUTTING

UNITS

• Carbide tipped cutter for longer life
• Saw properly guarded with covers
• Smooth and clean cut
• Movement through pneumatic cylinders, thus minimum pipe slipage and deformations
• Clamping force adjustable, depending upon wall thickness
• Universal clamping System to accommodate entire range of pipe sizes (O.D), thus no need for jaw replacement
• Chamfering available as option for planetary cutters

PIPE

TILING

UNIT

• Pneumatically operated pipe stacking

OPTIONALS

• Hopper drier for HDPE pipes
• Identification stripes for HDPE pipes
• Melt temperature and pressure indication
• Cold start protection
• Extra cooling tanks
• Chips (swarf) extraction system
• Pipe thick- thin device for socketing
• Encoder and PLC for lenght control
• Hopper loader